Scanning to a computer over a network using the control panel

1. Make sure:

   • The printer is connected to a network through a print server or through a wireless network connection.

   • The printer, the print server (if used), and the computer receiving the scan are all turned on.

   • The printer is configured to scan over a network.

2. Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.

   Note:

   Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.

3. From the control panel, press or repeatedly until Scan is highlighted.

4. Press .

5. Press or repeatedly until the computer to which you want to scan is highlighted.

6. Press .

   If you set a PIN during network setup and are being asked for it:

   1. Enter the PIN, select a digit location, and select a value for that digit.

   2. Press .

7. Wait until the printer has finished downloading the scan applications list.

8. Make your selections using the control panel buttons.

9. Press .

10. Follow the instructions on the screen of the computer receiving the scanned item.