Press to clear the message and continue processing the second side of the sheet.
Press , and then press to cancel printing.
Try one or more of the following:
Load the specified paper to clear the message and continue printing.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the specified paper to clear the message and continue printing.
Press , and then press to cancel printing.
Try one or more of the following:
Load the paper tray or other source with the correct paper type and size.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the paper tray or other source with the correct paper type and size.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the manual feeder with the correct paper type and size.
If there is no paper in the feeder, load a sheet, and then press to clear the message and continue printing.
Press to clear the message and continue printing.
The printer manually overrides the request, and then prints from an automatically selected tray.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the manual feeder with the correct paper type and size.
If there is no paper in the feeder, load a sheet, and then press to clear the message and continue printing.
Select the paper type and size to manually override the request.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the manual feeder with the correct paper type and size.
If there is no paper in the feeder, load a sheet of paper, and then press to clear the message and continue printing.
Select the paper type and size to manually override the request.
Press to clear the message and continue printing.
The printer manually overrides the request, and then prints from an automatically selected tray.
Press , and then press to cancel the print job.
Try one or more of the following:
Load the manual feeder with the correct paper type and size.
If there is no paper in the feeder, load a sheet, and then select to clear the message and continue printing.
Press to clear the message and continue printing.
The printer manually overrides the request, and then prints from an automatically selected tray.
Press , and then press to cancel the print job.
Insert the missing toner cartridge to clear the message and continue printing. If the message appears again, remove the cartridge, and then insert it until it clicks into place.
Try one or more of the following:
Open and close the top cover.
Remove the specified toner cartridge, and then insert it until it clicks into place.
Turn the printer off, wait ten seconds, and then turn the printer on.
Replace the specified toner cartridge with a new one.
Try one or more of the following:
Open and close the top cover.
Remove the imaging kit, and then insert it until it clicks into place.
Turn the printer off, wait ten seconds, and then turn the printer on.
Replace the defective imaging kit with a new one.
Replace the unsupported toner cartridge with a supported one.
The paper in the selected tray is too short for the current print job.
Try one or more of the following:
Load the appropriate paper in the tray.
Press the arrow buttons until
appears, and then press to clear the message and continue printing.Check tray length and width guides and make sure the paper is properly loaded in the tray.
For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper size and type.
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper is large enough for the data being printed.
Cancel the current print job.
The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save, clear the message, and continue printing.
Try one or more of the following:
Press the arrow buttons until
appears, and then press to print the portion of the job already stored and begin collating the rest of the print job.Cancel the current print job.
Try one or more of the following:
Press the arrow buttons until
appears, and then press to stop the defragment operation and continue printing.Delete fonts, macros, and other data in printer memory.
Install additional printer memory.
Try one or more of the following:
Press the arrow buttons until
appears, and then press to clear the message.Cancel the current print job.
Install additional printer memory.
Try one or more of the following:
Press the arrow buttons until
appears, and then press to clear the message and continue printing.Cancel the current print job.
Install additional printer memory.
Try one or more of the following:
Replace the defective flash memory card.
Press the arrow buttons until
appears, and then press to clear the message and continue printing.Try one or more of the following:
Press to clear the message and continue printing.
Delete fonts, macros, and other data stored in flash memory.
Upgrade to a larger capacity flash memory.
Press , and then press to cancel printing.
Try one or more of the following:
Press the arrow buttons until
appears, and then press to continue printing.Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
The printer detects unformatted flash memory when the power is turned on.
Try one or more of the following:
Press to clear the message and continue printing.
Turn the power off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
The printer detects that a network port is installed, but cannot communicate with it. The printer disables all communication to the associated network interface.
Try one or more of the following:
Press to clear the message and continue printing.
Turn the power off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
Try one or more of the following:
The printer discards any data received through the USB port. Press to clear the message and continue printing.
Make sure the USB Buffer menu item is not set to Disabled.
Try one or more of the following:
Turn the printer off, and then remove extra flash options:
Turn the printer off.
Unplug the power cord from the wall outlet.
Remove the excess flash memory.
Connect the power cord to a properly grounded outlet.
Turn the printer back on.
Press to clear the message and continue printing.
Turn the printer off.
Unplug the power cord from the wall outlet.
Note: Optional trays lock together when stacked. Remove stacked trays one at a time from the top down. |
Remove the additional tray(s).
Connect the power cord to a properly grounded outlet.
Turn the printer back on.