The Universal Paper Size is a user-defined setting that lets you print on paper sizes that are not preset in the printer menus. Set the Paper Size for the specified tray to Universal when the size you want is not available from the Paper Size menu. Then, specify all of the following Universal size settings for your paper:
Units of Measure (inches or millimeters)
Portrait Height and Portrait Width
Feed Direction
Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.). |
Make sure the printer is on and
appears.From the printer control panel, press .
Press the arrow buttons until
appears, and then press .Press the arrow buttons until
appears, and then press .Press the arrow buttons until
appears, and then press .Press the arrow buttons until the correct unit of measure appears, and then press .
appears, followed by the menu.
Press , and then press to return to the
state.Defining a specific height and width measurement for the Universal paper size (in the portrait orientation) allows the printer to support the size, including support for standard features such as duplex printing and printing multiple pages on one sheet.
From the Universal Setup menu, press the arrow buttons until
or appears, and then press .Note: Select to adjust the paper height setting or to adjust the paper width setting. |
Press the arrow buttons to decrease or increase the setting, and then press .
appears, followed by the menu.
Press , and then press to return to the
state.