Print menu settings pages to review the current menu settings and to verify if the printer options are installed correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings pages list all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. |
Make sure that the printer is on and
appears.From the printer control panel, press .
Press the arrow buttons until
appears, and then press .Press the arrow buttons until
appears, and then press .After the menu settings pages print,
appears.If the printer is attached to a network, print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration.
Make sure the printer is on and
appears.From the printer control panel, press .
Press the arrow buttons until
appears, and then press .Press the arrow buttons until
appears, and then press .After the network setup page prints,
appears.Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page.