Printing a font sample list

To print samples of the fonts currently available for your printer:

1. Make sure the printer is on and Ready appears.

2. From the printer control panel, press .

3. Press the up or down arrow button until Reports appears, and then press .

4. Press the up or down arrow button until Print Fonts appears, and then press .

5. Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS Fonts, and then press .

   After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory or on the hard disk.

1. Make sure the printer is on and Ready appears.

2. From the printer control panel, press .

3. Press the up or down arrow button until Reports appears, and then press .

4. Press the up or down arrow button until Print Directory appears, and then press .

After the directory list prints, the printer returns to the Ready state.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

1. Turn the printer off.

2. Hold down and the right arrow button while turning the printer on.

3. Release the buttons when the clock appears, and wait for CONFIG MENU to appear.

4. Press the up or down arrow button until Prt Quality Pgs appears, and then press .

   The print quality test pages print.

5. Press the up or down arrow button until Exit Config Menu appears, and then press .

   Resetting the Printer appears briefly, followed by a clock, and then Ready appears.