Installing optional trays

The printer supports the following optional input sources:

• 550-sheet tray

• 2,000-sheet high-capacity feeder

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using a high-capacity input tray, a duplex unit and an input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters.

1. Unpack the optional tray, and then remove all packing material.

2. Place the tray near the printer.

3. Turn the printer off.

4. Align the printer with the tray, and then lower the printer into place.

   Note: Optional trays lock together when stacked. When necessary, remove stacked trays one at a time from the top down.

   

   1	Standard 550-sheet tray (Tray 1)
   2	Optional 550-sheet trays

   
   

5. Turn the printer back on.

6. Set the printer software to recognize the optional input source.

   For more information, see Adding available options in the print driver.