Loading the 2000-sheet high-capacity feeder

The high-capacity feeder can hold up to 2,000 sheets of A4-, letter-, or legal-size paper (80 g/m² or 20 lb).

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed.

1. Pull the tray out.

   

2. Adjust the width guide as necessary.

   

3. Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

   

4. Load paper into the tray with the print side faceup.

   

   Note: Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams.

   

   Notes:

   • Place pre-punched paper with the holes toward the front of the tray.
   • Place letterheads faceup with the header on the left side of the tray.
   • Place letterheads facedown with the header on the right side of the tray for duplex printing.

5. Insert the tray.