If paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently pull it out.
| Note: Make sure all paper fragments are removed. |
Open the side door of the printer.
 | CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. |
If paper is visible inside the fuser unit, then open the fuser access door.
Firmly grasp the jammed paper on each side, and then gently pull it out.
| Warning—Potential Damage: Do not touch the center of the fuser unit. Doing so will damage the fuser. |
| Note: Make sure all paper fragments are removed. |
Close the side door.
Open the side door of the printer.
| | CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. |
If paper is visible under the fuser, then firmly grasp the jammed paper on each side, and then gently pull it out.
| Note: Make sure all paper fragments are removed. |
Close the side door of the printer.
From the printer control panel, touch Continue, jam cleared.