455 staple jam

1. Press the latch to open the stapler door.

   Note: The stapler door is located behind the finisher.

   

2. Lower the latch of the staple cartridge holder, and then pull the staple cartridge holder out of the printer.

   

3. Use the metal tab to lift the staple guard, and then remove any jammed or loose staples.

   

4. Close the staple guard.

   

5. Press down on the staple guard until it clicks into place.

6. Push the staple cartridge holder firmly back into the stapler unit until the staple cartridge holder clicks into place.

   

7. Close the stapler door.

8. From the printer control panel, touch Continue, jam cleared.