Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

Paper sizes supported by the printer

Paper size	Dimensions	520-sheet trays (standard or optional)	High capacity feeder	Duplex unit
¹ The printer cannot simultaneously sense A5 and statement paper sizes. From the Size Sensing menu, specify which size you want the printer to detect. This setting applies to all automatic trays except the multipurpose feeder. The multipurpose feeder can support both sizes. ² Measurements apply to simplex (one-sided) printing only. For duplex (two-sided) printing, the minimum size is 140 x 148 mm (5.5 x 5.8 in.) and the maximum size is 297 x 432 mm (11.7 x 17 in.).
A3	297 x 420 mm (11.7 x 16.5 in.)		X
A4	210 x 297 mm (8.3 x 11.7 in.)
A5¹	148 x 210 mm (5.8 x 8.3 in.)		X	X
Executive	184 x 267 mm (7.3 x 10.5 in.)	X	X
Folio	216 x 330 mm (8.5 x 13 in.)		X
JIS B4	257 x 364 mm (10.1 x 14.3 in.)		X
JIS B5	182 x 257 mm (7.2 x 10.1 in.)
Legal	216 x 356 mm (8.5 x 14 in.)		X
Letter	216 x 279 mm (8.5 x 11 in.)
Statement¹	140 x 216 mm (5.5 x 8.5 in.)		X	X
Tabloid	279 x 432 mm (11 x 17 in.)		X
Universal	100 x 148 mm (3.9 x 5.8 in.) up to 305 x 483 mm (11.7 x 19 in.)²	X	X
7 3/4 Envelope (Monarch)	98 x 191 mm (3.9 x 7.5 in.)	X	X	X
B5 Envelope	176 x 250 mm (6.9 x 9.8 in.)	X	X	X
C5 Envelope	162 x 229 mm (6.4 x 9 in.)	X	X	X
9 Envelope	98 x 225 mm (3.9 x 8.9 in.)	X	X	X
10 Envelope	105 x 241 mm (4.1 x 9.5 in.)	X	X	X
DL Envelope	110 x 220 mm (4.3 x 8.7 in.)	X	X	X

Paper types and weights supported by the printer

The printer engine supports 60–220 g/m² (16–60 lb) paper weights. The duplex unit supports 63–170 g/m² (17–45 lb) paper weights.

Paper type	520-sheet trays	High capacity feeder	Duplex unit
^* Vinyl labels are not supported.
Plain Paper
Bond
Letterhead
Preprinted
Colored Paper
Card stock
Glossy paper	X	X	X
Paper labels^*	X	X
Transparencies			X
Envelopes	X	X	X

Paper types and weights supported by the finisher

Use this table to determine the possible output destinations of print jobs which use supported paper types and weights. The paper capacity of each output bin is listed in parentheses. Paper capacity estimations are calculated based on 75 g/m² (20 lb) paper.

The Finisher standard bin and Bin 1 support 60–220 g/m² (16–60 lb) paper weights. Bin 2 (booklet-maker) supports 60–90 g/m² (16–24 lb) paper weights plus one additional cover weighted up to 220 g/m² (60 lb).

Paper type	Finisher standard bin (500 sheets)	Bin 1 (1500/3000 sheets)^*	Bin 2 (300 sheets)
^* Bin 1 of the booklet finisher supports 1500 sheets. Bin 1 of the standard finisher supports 3000 sheets.
Plain Paper
Bond
Letterhead
Preprinted
Colored Paper
Card stock
Glossy paper		X	X
Labels		X	X
Transparencies		X	X
Envelopes	X	X	X

Supported finishing features

1	Horizontal transport unit
2	Finisher standard bin
3	Finisher bin 1
4	Finisher bin 2 (booklet-maker)

Notes:

The finisher shown above, is the booklet finisher. Bin 2 is available only when the booklet finisher is installed.
All paper capacities are based on 75 g/m² (20 lb) paper.

Horizonal transport unit

The paper capacity is 50 sheets.
Finishing options are not supported in this bin.
Envelopes are routed here.
Universal paper is routed here when it is longer than 483 mm (19 in.) or shorter than 148 mm (5.8 in.).

Finisher standard bin

The paper capacity is 500 sheets.
Envelopes and executive-size paper are not supported in this bin.
Finishing options are not supported in this bin.

Bin 1

The paper capacity is 3000 sheets when the standard finisher is installed.
The paper capacity is 1500 sheets when the booklet finisher is installed.

Size	Punch^*	Offset	Single/double staple	Double dual staple
^* For the Universal paper size, the finishing edge must be at least 9 in. (229 mm) for a 3-hole punch and 10 in. (254 mm) for a 4-hole punch. Punch—Two-, three-, or four-hole punch settings Single staple—One staple Double staple—Two staples Double dual staple—Two sets of two staples. This setting is supported only for widths between 8 in. (203 mm) and 11.7 in. (297 mm) with lengths between 7.2 in. (182 mm) and 17 in. (432 mm).
A3
A4
A5	X	X	X	X
Executive				X
Folio	X			X
JIS B4				X
JIS B5				X
Legal	X			X
Letter
Statement	X	X	X
Tabloid				X
Universal
Envelopes (any size)	X	X	X	X

Bin 2 (booklet-maker)

Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet-maker) is 300 sheets or 20 sets of 15-sheet booklets.

Size	Bi fold	Booklet fold	Saddle staple
SEF—The paper is loaded in the short edge orientation. The short edge of the paper enters the printer first. Bi fold—Each page is individually folded and stacked separately. Booklet fold—A multiple-page job is folded along the center into a single booklet. Saddle staple—A booklet-fold print job is stapled along the center fold.
A3
A4 (only SEF)
A5	X	X	X
Executive	X	X	X
Folio
JIS B4
JIS B5	X	X	X
Legal
Letter (only SEF)
Statement	X	X	X
Tabloid
Universal	X	X	X
Envelopes (any size)	X	X	X