Clearance requirements

Note: These clearance values are for the most compact operating configuration of the product. Additional clearance (especially from the front) may be needed to utilize the multipurpose feeder, clear paper misfeed, lift the scanner lid (for MFPs only), or replace toner and imaging unit.
Clearance requirements for the SFP

Printer model

Left side

Right side3

Front

Rear

Top

1 Allow an additional 132 mm (5.2 in.) above the printer for a 650-sheet duo tray. Allow an additional 264 mm (10.4 in.) for a 650-sheet duo tray and 550-sheet tray.

2 Allow an additional 132 mm (5.2 in.) above the dtn or dte printer for a 550-sheet tray.

3 A minimum clearance of 178 mm (7.0 in.) is required on the right side for changing toner cartridges.

CS310, CS410, CS510

Clearance distance 1

76.2 mm (3 in.)

152.4 mm (6 in.)

508.0 mm (20 in.)

101.6 mm (4 in.)

254 mm (10 in.)

CS410dtn, CS510dte

Clearance distance 2

76.2 mm (3 in.)

152.4 mm (6 in.)

508.0 mm (20 in.)

101.6 mm (4 in.)

254 mm (10 in.)


Clearance requirements for the MFP

Printer model

Left side

Right side

Front

Rear

Top

CX310, CX410, CX510

76.2 mm (3 in.)

304.8 mm (12 in.)

508 mm (20 in.)

101.6 mm (4 in.)

291.7 mm (11.56 in.)