Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any hardware options, then leave enough room for them also. It is important to:

Set up the printer near a properly grounded and easily accessible electrical outlet.
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
- Clean, dry, and free of dust.
- Away from stray staples and paper clips.
- Away from the direct airflow of air conditioners, heaters, or ventilators.
- Free from direct sunlight and humidity extremes.
Observe the recommended temperatures and avoid fluctuations.
Ambient temperature
16 to 32°C (60 to 90°F)
Storage temperature
-20 to 40°C (-4 to 104°F)
Allow the following recommended amount of space around the printer for proper ventilation:
1
Right side
110 mm (4.33 in.)
2
Front
305 mm (12 in.)
3
Left side
65 mm (2.56 in.)
4
Rear
100 mm (3.94 in.)
5
Top
305 mm (12 in.)

Ambient temperature	16 to 32°C (60 to 90°F)
Storage temperature	-20 to 40°C (-4 to 104°F)

1	Right side	110 mm (4.33 in.)
2	Front	305 mm (12 in.)
3	Left side	65 mm (2.56 in.)
4	Rear	100 mm (3.94 in.)
5	Top	305 mm (12 in.)