PostScript envelope tray support

The envelope tray the printer selected when it receives an envelopetray operator is listed in Envelopetray operator selections.

Printer action when manualfeed is false

The printer sets the PageSize Policy to 0 if manualfeed in statusdict and the ManualFeed page device parameter are false.

The printer checks and compares source tray size settings between printer and print job data stream.

Envelope setting	Printer action
Envelope size settings match	The printer pulls the envelope.
Envelope size settings do not match	The printer searches sources in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary. If search cannot find the requested media size, then the following search order is used: Envelope feeder Multipurpose feeder
Requested size and type are not available from any automatic source	You are prompted to load the requested envelope size and type in the manual feed source. If the size is still not available, then a configurationerror is issued, and the print job is flushed.

Envelope setting

Printer action

Envelope size settings match

The printer pulls the envelope.

Envelope size settings do not match

The printer searches sources in the order defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.

If search cannot find the requested media size, then the following search order is used:

Envelope feeder
Multipurpose feeder

Requested size and type are not available from any automatic source

You are prompted to load the requested envelope size and type in the manual feed source.

If the size is still not available, then a configurationerror is issued, and the print job is flushed.

Printer action when manualfeed is true

The printer prompts you to load the requested size manually if manualfeed or ManualFeed is true. If no manual feed exists on the printer, then a rangecheck error message is issued.

These operators are equivalent to executing the following PS emulation sequence:

= Supported X = Not supported Tray operators		Printer model
Operator	Tray selected (corresponding image size is set)	MS310, MS312, MS315, MS410, MS415, MS510, MS610	MX310, MX410, MX510, MX511	MX610, MX611
110x220envelopetray	Tray with 110 x 220-size envelopes
dlenvelopetray	Tray with 110 x 220-size envelopes
162x229envelopetray	Tray with 162 x 229-size envelopes
c5envelopetray	Tray with 162 x 229-size envelopes
176x250envelopetray	Tray with 176 x 250-size envelopes
b5envelopetray	Tray with 176 x 250-size envelopes
3.875x7.5envelopetray	Tray with 3.875 x 7.5-size envelopes
monarcenvelopetray	Tray with 3.875 x 7.5-size envelopes
3.875x8.875envelopetray	Tray with 3.875 x 8.875-size envelopes
4.125x9.5envelopetray	Tray with 4.125 x 9.5-size envelopes
com10envelopetray	Tray with 4.125 x 9.5-size envelopes
otherenvelopetray	Tray with other size envelopes