Using the Embedded Web Server

If the printer is installed on a network, then you can use the Embedded Web Server to do the following:

• View the virtual display of the printer control panel.

• Check the status of the printer supplies.

• Configure supply notifications.

• Configure printer settings.

• Configure network settings.

• View reports.

To access the Embedded Web Server for your printer:

1. Obtain the printer IP address:

   • From the TCP/IP section in the Network/Ports menu

   • By printing a network setup page or menu settings page, and then finding the TCP/IP section

     Notes:

     • An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
     • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2. Open a Web browser, and then type the printer IP address in the address field.

3. Press Enter.

   The Embedded Web Server page appears.