Loading the multipurpose feeder

1. Open the multipurpose feeder.

   

2. Adjust the guide to match the size of the paper you are loading.

   

3. Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

   

4. Load the paper.

   • Load only one size and type of paper.

     Loading letterhead

     Without an optional finisher	With an optional finisher
     One-sided printing Note: For long-edge orientation, load letterhead facedown with the header on the left side of the feeder.	One-sided printing Note: For long-edge orientation, load letterhead facedown with the header on the right side of the feeder.
     Two-sided printing Note: For long-edge orientation, load letterhead faceup with the header on the right side of the feeder.	Two-sided printing Note: For long-edge orientation, load letterhead faceup with the header on the left side of the feeder.

     
     

     Loading prepunched paper

     One-sided printing	Two-sided printing

     
     

   • Load envelopes with the flap side up.

     

     Warning—Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self-stick adhesives. These envelopes may severely damage the printer.

   • Make sure that the paper is below the maximum fill line. Overfilling may cause paper jams.

     

5. From the control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the feeder.