Slide the 3000-sheet tray.
Remove the jammed paper.
Note: Make sure that all paper fragments are removed. |
Open door F, and then remove the jammed paper.
Note: Make sure that all paper fragments are removed. |
Close door F.
Open door C. Make sure that it does not hit any cable attached to the printer.
Remove the jammed paper from any of the following locations:
Note: Make sure that all paper fragments are removed. |
![]() | CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it. |
Fuser area
Below the fuser area
Duplex area
Above the duplex area
Close door C, and then slide the 3000-sheet tray back into place.