[x]-page jam, press latch to access area G. Leave paper in bin. [40y.xx]

1. Remove all paper from the staple finisher bin.

   

2. Press the latch and slide the staple finisher to the left, and then remove the jammed paper.

   

   Notes:

   • Make sure that all paper fragments are removed.
   • If necessary, turn spinner wheel G1 downward to feed jammed paper into the finisher bin, and then remove the paper.
   

3. Slide the finisher back into place.

   

4. Open door C, and then remove the jammed paper.

   CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

   

   Notes:

   • Make sure that door C does not hit any cable attached to the printer.
   • Make sure that all paper fragments are removed.
   • If the 3000-sheet tray is installed, then slide the tray to the right to open the door.

5. Close door C.