[x]-page jam, open door H and rotate knob H6 clockwise. Leave paper in bin. [426.xx–428.xx]

If the jammed paper is located under door G, then open the door and remove the paper.

1. Open door J, and then lift handle J1.

   

2. Open door H.

   

3. Remove the jammed paper from any of the following locations:

   Note: Make sure that all paper fragments are removed.

   • Door J

     

     Note: If there is a jammed paper between the finisher bins, then remove the paper.

     

   • Areas H1 and H2

     

   • Areas H3 and H4

     

   • Area H6

     

4. Using handle H5, pull out the booklet maker.

   

5. Remove the jammed paper from any of the following locations:

   Note: Make sure that all paper fragments are removed.

   • Area H8

     

   • Area H9

     

   • Area H10

     

6. Push the booklet maker back into place.

7. Close door H.

8. Open door C, and then remove the jammed paper.

   CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.

   

   Notes:

   • Make sure that door C does not hit any cable attached to the printer.
   • Make sure that all paper fragments are removed.
   • If the 3000-sheet tray is installed, then slide the tray to the right to open the door.

9. Close door C.