![]() | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. |
![]() | CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: |
Turn off the printer, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer.
If the printer does not have a caster base but is configured with optional trays, then remove the trays.
Use the handholds located on both sides of the printer to lift it.
Make sure your fingers are not under the printer when you set it down.
Make sure there is adequate clearance around the printer.
Use only the power cord provided with this product or the manufacturer’s authorized replacement.
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty. |
The printer and its hardware options can be safely moved to another location by following these precautions:
Any cart used to move the printer must have a surface able to support the full footprint of the printer.
Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.
Keep the printer in an upright position.
Avoid severe jarring movements.