![]() | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. |
![]() | CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. |
![]() | CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. |
Install the printer and any options you have purchased in the following order:
Optional 2 x 500- or 2500-sheet tray
Printer
Staple finisher
Staple, hole punch finisher or booklet finisher
Optional 3000-sheet tray
Note: The staple finisher is not supported if another finisher is installed. For more information on installing the finishers and optional trays, see the instruction sheet that came with the option. |
Notes:
![]() | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. |
![]() | CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. |
![]() | CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. |
The optional trays come with the following accessories:
Accessory name |
Quantity |
---|---|
Stabilizing feet ![]() |
2 |
Locking clip ![]() |
3 |
Metal bracket ![]() |
1 |
Screw ![]() |
5 |
Turn off the printer.
Unplug the power cord from the electrical outlet and from the printer.
Unpack the optional tray, and then remove all packing material.
Attach the stabilizing feet to the optional tray.
Note: Make sure the feet click into place. |
Remove the connector cover from the printer.
Lift the printer using the handles at the sides.
![]() | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely. |
Align the printer with the tray, and then lower the printer into place.
Remove the tape from the connectors, and then plug the connectors into the receptacle of the printer.
Open Tray 2 and Tray 3.
Secure the tray to the printer using the locking clips and the metal bracket.
Back
Front
Reinstall the connector cover.
Connect the power cord to the printer and electrical outlet.
Turn on the printer.
Set the printer software to recognize the optional tray. For more information, see Adding available options in the print driver.