From the stapler bin, firmly grasp the jammed paper on each side, and then gently pull it out.
| Note: Make sure all paper fragments are removed. |
Open the stapler outer and inner doors.
Pull down the latch of the staple cartridge holder, and then pull the holder out of the printer.
Use the metal tab to lift the staple guard, and then remove any loose staples.
Press down the staple guard until it clicks into place.
Slide the staples toward the metal bracket.
| Note: If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the staples near the metal bracket. |
| Warning—Potential Damage: Do not tap the cartridge on a hard surface. This could damage the cartridge. |
Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place.
Close the stapler door.
From the printer control panel, touch Done to clear the message and continue printing.