Making copies

1. Load paper.

2. Load an original document faceup into the ADF or facedown on the scanner glass.

3. From the printer control panel, navigate to:

    > Copy >  > Copies

4. Press the left or right arrow button to select the number of copies.

5. From the Copy menu screen, press the up or down arrow button to scroll to the option you want to set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press to make a selection.

6. Select the copy mode:

   • Press to switch to color mode.

   • Press to switch to black-and-white mode.

   When you select color or black-only printing, the light that corresponds to your choice comes on.

7. Press .

Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity.