Copying on specialty media

Copying to transparencies

  1. Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

    Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  2. If you are loading a document into the ADF, then adjust the paper guides.

  3. From the printer control panel, press the Copy button.

  4. From the Copy area, press the Options button.

  5. Press the arrow buttons until Paper Source appears, and then press select button.

  6. Press the arrow buttons until the paper source containing the transparencies appears, and then press select button.

  7. Press back button.

  8. Change the copy settings as needed.

  9. Press start button.

  10. If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.

  11. Press back button to return to Ready.

Copying to letterhead

  1. Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

    Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
  2. If you are loading a document into the ADF, then adjust the paper guides.

  3. From the printer control panel, press the Copy button.

  4. Press the Options button.

  5. Press the arrow buttons until Paper Source appears, and then press select button.

  6. Press the arrow buttons until the paper source containing the letterhead appears, and then press select button.

  7. Change the copy settings as needed.

  8. Press start button.

  9. If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.

  10. Press back button to return to Ready.