Printing information pages

See Printing a menu settings page and Printing a network setup page for more information on printing these pages.

Printing a font sample list

To print samples of the fonts currently available for your printer:

  1. Make sure the printer is on and Ready appears.

  2. From the printer control panel, press Menu button.

  3. Press the arrow buttons until Reports appears, and then press select button.

  4. Press the arrow buttons until Print Fonts appears, and then press select button.

  5. Press the arrow buttons until PCL Fonts or PostScript Fonts appears, and then press select button.

    After the font sample list prints, Ready appears.

Printing a directory list

A directory list shows the resources stored in flash memory.

  1. Make sure the printer is on and Ready appears.

  2. From the printer control panel, press Menu button.

  3. Press the arrow buttons until Reports appears, and then press Select button.

  4. Press the arrow buttons until Print Directory appears, and then press select button.

    After the directory list prints, Ready appears.

Printing the print quality test pages

Print the print quality test pages to isolate print quality problems.

  1. Turn the printer off.

  2. Hold down select button and right arrow button while turning the printer on.

  3. Release the buttons when the clock appears, and wait for CONFIG MENU to appear.

  4. Press the arrow buttons until Prt Quality Pgs appears, and then press select button.

    The print quality test pages print.

  5. Press the arrow buttons until Exit Config Menu appears, and then press select button.

    Resetting the Printer appears briefly, followed by a clock, and then Ready appears.