After you set the Paper Size and Paper Type to the correct settings for the size and type used in the trays, then any trays containing the same size and type are automatically linked by the printer.
Note: If the size of the paper being loaded now is the same size as the previously loaded paper, do not change the Paper Size setting. |
Make sure the printer is on and
appears.From the printer control panel, press .
appears.
Press .
Press the arrow buttons until
appears, and then press .appears.
Press the arrow buttons until the correct source appears, and then press .
appears under the source name.
Press .
Press the arrow buttons until the correct size appears, and then press .
appears, followed by .
Press the arrow buttons until
appears, and then press .Press the arrow buttons until the correct type appears, and then press .
appears, followed by .