| Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty. |
| | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. |
| | CAUTION—POTENTIAL INJURY: Follow these guidelines to avoid personal injury or printer damage: |
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
Disconnect all cords and cables from the printer before moving it.
Use the handholds located on both sides of the printer to lift it.
Make sure your fingers are not under the printer when you set it down.
Before setting up the printer, make sure there is adequate clearance around it. For more information, see Selecting a location for the printer.
The printer and options can be safely moved to another location by following these precautions:
Any cart used to move the printer must be able to support its weight and have a large enough surface to support the full footprint of the printer.
Keep the printer in an upright position.
Avoid severe jarring movements.