Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the types of paper they support.

For information on card stock and labels, see the Card Stock & Label Guide on the Lexmark Web site at www.lexmark.com/publications.

Paper sizes supported by the printer

Paper size	Dimensions	Standard 250-sheet tray	Optional 250- or 550-sheet tray	Duplex path
¹ A6 is supported only for grain long papers. ² If a paper size you want to use is not listed, configure a Universal paper size. For more information, see Configuring Universal paper settings. ³ Universal paper size has limited support in the duplex path for paper sizes 210 x 279 mm (8.3 x 11 in.) or larger.
A4	210 x 297 mm (8.3 x 11.7 in.)
A5	148 x 210 mm (5.8 x 8.3 in.)			X
A6¹	105 x 148 mm (4.1 x 5.8 in.)		X	X
JIS B5	182 x 257 mm (7.2 x 10.1 in.)			X
Letter	216 x 279 mm (8.5 x 11 in.)
Legal	216 x 356 mm (8.5 x 14 in.)
Executive	184 x 267 mm (7.3 x 10.5 in.)			X
Oficio (Mexico)	216 x 340 mm (8.5 x 13.4 in.)
Folio	216 x 330 mm (8.5 x 13 in.)
Statement	140 x 216 mm (5.5 x 8.5 in.)			X
Universal²	76.2 x 127 mm (3 x 5 in.) up to 216 x 356 mm (8.5 x 14 in.)			X³
7 3/4 Envelope (Monarch)	98 x 191 mm (3.9 x 7.5 in.)	X	X	X
9 Envelope	98 x 225 mm (3.9 x 8.9 in.)	X	X	X
10 Envelope	105 x 241 mm (4.1 x 9.5 in.)	X	X	X
DL Envelope	110 x 220 mm (4.3 x 8.7 in.)	X	X	X
C5 Envelope	162 x 229 mm (6.4 x 9 in.)	X	X	X
B5 Envelope	176 x 250 mm (6.9 x 9.8 in.)	X	X	X
Other Envelope	229 x 356 mm (9 x 14 in.)	X	X	X

Paper types and weights supported by the printer

The printer engine and the duplex path support 60–90 g/m² (16–24 lb) paper weights. The multipurpose feeder supports 60–163 g/m² (16–43 lb) paper weights.

Paper type	Standard 250-sheet tray	Optional 250- or 550-sheet tray	Multipurpose feeder	Manual feeder	Duplex path
¹ Single-sided paper labels designed for laser printers are supported for occasional use. It is recommended to print no more than 20 pages of paper labels a month. Vinyl, pharmacy, and dual-sided labels are not supported. ² Use envelopes that lie flat when individually placed on a table facedown.
Paper Plain Light Heavy Rough/Cotton Recycled Custom
Bond
Letterhead
Preprinted
Colored Paper
Card stock
Glossy paper	X	X	X	X	X
Paper labels¹					X
Transparencies
Envelopes (smooth)²	X	X			X

Paper capacities

The capacities of the trays and the multipurpose feeder are based on 75 g/m² (20 lb) paper.

Load up to	Notes
Tray 1 250 sheets of paper 150 sheets of A6-size paper 50 paper labels 50 transparencies	Note: Vinyl, pharmacy, or dual-sided labels are not supported. Use paper labels only. Single-sided paper labels designed for laser printers are supported for occasional use. It is recommended to print no more than 20 pages of paper labels per month.
Tray 2 250 or 550 sheets of paper 50 paper labels	Note: Only one optional drawer may be installed on the printer at a time. The maximum amount of paper that can be loaded depends on whether you have an optional 250- or 550-sheet tray.
Multipurpose feeder 50 sheets of paper 15 paper labels 10 transparencies 10 sheets of card stock 7 envelopes	Note: Feed paper into the multipurpose feeder only to the point where its leading edge can contact the paper guides. Do not force the paper into the feeder.

Load up to

Notes

Tray 1

250 sheets of paper
150 sheets of A6-size paper
50 paper labels
50 transparencies

Note: Vinyl, pharmacy, or dual-sided labels are not supported. Use paper labels only. Single-sided paper labels designed for laser printers are supported for occasional use. It is recommended to print no more than 20 pages of paper labels per month.

Tray 2

250 or 550 sheets of paper
50 paper labels

Note: Only one optional drawer may be installed on the printer at a time. The maximum amount of paper that can be loaded depends on whether you have an optional 250- or 550-sheet tray.

Multipurpose feeder

50 sheets of paper
15 paper labels
10 transparencies
10 sheets of card stock
7 envelopes

Note: Feed paper into the multipurpose feeder only to the point where its leading edge can contact the paper guides. Do not force the paper into the feeder.