Pausing the current print job to make copies

When the “Allow priority copies” setting is On, the printer pauses the current print job when you start a copy job.

Note: The “Allow priority copies” setting must be set to On in the Copy Settings menu so that you can pause the current print job and make copies.

  1. Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

    Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

  2. If you are loading a document into the ADF, then adjust the paper guides.

  3. From the printer control panel, press start button.

  4. If you placed the document on the scanner glass, then touch Finish the Job to return to the home screen.