Changing port settings after installing a new network Internal Solutions Port

When a new Lexmark Internal Solutions Port (ISP) is installed in the printer, the printer configurations on computers that access the printer must be updated since the printer will be assigned a new IP address. All computers that access the printer must be updated with this new IP address.

Notes:

• If the printer has a static IP address, then you do not need to make any changes to the computer configurations.
• If the computers are configured to use the network name, instead of an IP address, then you do not need to make any changes to your computer configurations.
• If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure the printer is disconnected from the Ethernet network when you configure the printer to operate wirelessly. If the printer is connected to the Ethernet network, then the wireless configuration completes, but the wireless ISP is inactive. To activate the wireless ISP, disconnect the printer from the Ethernet network, turn off the printer, and then turn it back on.
• Only one network connection is active at a time. To switch between Ethernet and wireless connection types, turn off the printer, connect the cable (to switch to an Ethernet connection) or disconnect the cable (to switch to a wireless connection), and then turn the printer back on.

For Windows users

1. Open a Web browser, and then type the printer IP address in the address field.

   Notes:

   • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
   • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2. Open the printers folder.

   In Windows 8

   From the Search charm, type Run and then navigate to:

   Apps list > Run > type control printers > OK

   In Windows 7 or earlier

   1. Click , or click Start and then click Run.

   2. In the Start Search or Run dialog, type control printers.

   3. Press Enter, or click OK.

3. To select the printer that has changed, do either of the following:

   • Press and hold the printer, and then select Printer properties.

   • Right-click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier versions).

   Note: If there is more than one copy of the printer, then update all of them with the new IP address.

4. Click the Ports tab.

5. Select the port from the list, and then click Configure Port.

6. Type the new IP address in the “Printer Name or IP Address” field.

7. Click OK > Close.

For Macintosh users

1. Open a Web browser, and then type the printer IP address in the address field.

   Notes:

   • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
   • If you are using a proxy server, then temporarily disable it to load the Web page correctly.

2. Add the printer.

   • For IP printing:

     1. From the Apple menu, navigate to either of the following:

        • System Preferences > Print & Scan

        • System Preferences > Print & Fax

     2. Click +.

     3. Click the IP tab.

     4. Type the printer IP address in the address field, and then click Add.

   • For AppleTalk printing:

     Notes:

     • Make sure AppleTalk is activated on your printer.
     • This feature is supported only in Mac OS X version 10.5.

     1. From the Apple menu, navigate to:

        System Preferences > Print & Fax

     2. Click +, and then navigate to:

        AppleTalk > select the printer > Add