Loading the 2,000-sheet high-capacity feeder

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper tray separately. Keep all other trays closed until needed.

1. Pull the tray out.

2. Pull up and slide the width guide to the correct position for the paper size you are loading.

   

3. Unlock the length guide.

   

4. Push the length guide release latch to raise the length guide. Slide the guide to the correct position for the paper size you are loading, and then lock the guide.

   

5. Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

   

6. Load the paper stack:

   • Printable side faceup for one-sided printing

   • Printable side facedown for two-sided printing

     One-sided printing	Two-sided printing

     
     

   • Make sure paper does not exceed the maximum paper fill indicator located on the side of the tray.

     Warning—Potential Damage: Overloading the tray may cause paper jams and possible printer damage.

   

7. Insert the tray.