Resetting the maintenance counter

Reset the maintenance counter after installing the new photoconductors. Use any one of the following procedures:

When a “replace” or “low” message does not appear

Follow this procedure when the photoconductors are replaced and no “replace” or “low” message appears:

1. From the home screen, navigate to:

   > Supplies Menu > Replace Supply.

2. Touch the buttons that indicate which of the four photoconductors you replaced.

   • All

   • Cyan Photoconductor

   • Magenta Photoconductor

   • Yellow Photoconductor

   • Black Photoconductor

3. When [color] photoconductor replaced appears, touch Yes.

4. Touch to return to the home screen.

When a “replace” or “low” message appears

Follow this procedure when the photoconductors are replaced and 84 Replace [color] photoconductor,84 [color] photoconductor nearly low, or 84 [color] photoconductor low still appears:

1. From the home screen, navigate to:

   Status/Supplies > Supply Replaced

2. When Replaced [color] photoconductor appears, touch Yes.

   Notes:

   • All four photoconductors should be replaced at the same time for optimum print quality.
   • Ready appears when the counter is reset.