Loading the optional 850- and 1,150-sheet trays

The 850- and 1,150-sheet trays support the same paper sizes and types, and require the same process for loading paper.

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each paper drawer or tray separately. Keep all other drawers or trays closed until needed.

1. Pull the tray out.

   

2. Squeeze and then slide the length guide to the correct position for the paper size you are loading.

   

3. Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.

   

4. Load the paper stack with the recommended print side faceup.

   

   Notes:

   • Place print side facedown for duplex printing.
   • Place pre-punched paper with the holes toward the front of the tray.
   • Place letterheads faceup with the header on the left side of the tray.
   • Place letterheads facedown with the header on the right side of the tray for duplex printing.
   • Make sure the paper is below the maximum fill line located on the edge of the paper tray.

   Warning—Potential Damage: Overloading the tray can cause paper jams and possible printer damage.

5. Insert the tray.

6. From the printer control panel, verify the Paper Size and Paper Type setting for the tray based on the paper you loaded.