Pull the tray out.
Adjust the width guide as necessary.
Flex the sheets back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface.
Load paper into the tray with the print side faceup.
| Note: Make sure the paper is below the maximum fill line located on the edge of the paper tray. Overloading the tray can cause paper jams and possible printer damage. |
Notes:
- Place pre-punched paper with the holes toward the front of the tray.
- Place letterheads faceup with the header on the left side of the tray.
- Place letterheads facedown with the header on the right side of the tray for duplex printing.
Insert the tray.