| Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty. |
| | CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to move it safely. |
| | CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: |
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
Disconnect all cords and cables from the printer before moving it.
Lift the printer off the optional drawer, and set it aside instead of trying to lift the drawer and printer at the same time.
| Note: Use the handholds located on both sides of the printer to lift it off the optional drawer. |
Make sure your fingers are not under the printer when you set it down.
Before setting up the printer, make sure there is adequate clearance around it.
The printer and options can be safely moved to another location by following these precautions:
Any cart used to move the printer must be able to support its weight and have a large enough surface to support the full footprint of the printer.
Keep the printer in an upright position.
Avoid severe jarring movements.
See Installing drawers for help unlocking, moving, or locking drawers.
Update the options in the printer driver after you have completed installation.