Installing client software with secure print support

On a client computer or print server, do the following:

1. From the LDD installation package, run Setup.exe.

2. Select a language for the installation, and then click OK.

3. From the LDD Setup window, click Next.

4. Select Install LDD system components, and then click Next.

5. Accept the license agreement, and then click Next.

6. From the list of components, select Client Software, and click Next.

   Note: Do not install the Microsoft Windows application software Select’N’Send on a print server.

7. From the Device Support Update window, click Next.

8. Specify a location for the installation, and then click Next.

9. From the Select Client Software window, select Client Software with Secure Print Support.

10. In the Loadbalancer IP/Hostname field, type the IP address or the host name of the server.

11. From the Profile Name menu, select the client profile.

    Notes:

    • The Profile Name menu lists all the fetched client software profiles.
    • If no client software profiles are fetched, then type the name of the profile. In this scenario, the default name is PrintSubmit.

12. From the Secured Print Settings section, do the following:

    1. Select Enable Secured Print Support.

    2. Select Allow Unencrypted print job submission.

13. Review the setup information, and then click Next.

14. Click Install.

15. Click Finish.