Installing the Lexmark Job Router Service for secure print

Lexmark Job Router Service is a Windows service that submits print jobs to the Lexmark Print Management (LPM) database directly. The service uses standard TCP/IP ports on port number 9100.

1. From the computer, run the CD, and then navigate to the \tools\LxkJobRouter folder.

2. Run the JobRouterSetup.exe file, and then click Next.

3. Type the LPM site ID.

4. In the Database IP field, type the IP address of the LPM database.

5. Select the database type.

6. From the Secured Print Settings section, do the following:

   1. Select Enable Secured Print Support.

   2. Select Allow Unencrypted print job submission.

   3. If the database is different for LDD and LPM, then select Different DB for LDD and LPM.

      Note: If the database is different for LDD and LPM, then LoadBalancer IP Address is also required.

7. Type the location where print jobs are saved.

   Note: This setting must be the same as the LPM location configuration.

8. If the location is a shared network folder, then type your credentials.

9. If the LPM database is Microsoft SQL Server, then click Next, and then configure the database settings.

10. Click Finish.