If a hybrid solution is installed, and an associated eSF applications includes a descriptor file, then you can edit the eSF application settings for e-Task 2+ and e-Task 3 printers using Lexmark Distributed Intelligent Capture. Each device group contains separate settings for any eSF applications, much like local solution settings. For a list of e-Task 2+ and e-Task 3 printers, see Supported printers.
| Note: You must configure eSF application settings for e-Task 2 and X642 printers using the Embedded Web Server on each printer after the application is deployed. Hybrid solutions are not supported by e-Task printers. For a list of e-Task and e-Task 2 printers, see Supported printers. |
Click the Device Groups tab.
Select a device group from the Device Groups list.
Select eSF Configuration from the Tasks list.
Select an eSF application from the list in the main section.
Select the Verify eSF application deployment and deploy these eSF settings check box.
Configure the settings of the eSF application for the current device group, and then click Save Settings.
| Note: A Policy Update is required after changing eSF application settings for a device group. For more information see Updating policies for device groups. |