I cannot print to my network printer

If your All-In-One is set as a network printer and you cannot print with it, make sure:

• Your All-In-One is connected to a functioning network connection. Check the cable connection.
• Your All-In-One is not disconnected from the power source or is not turned off. Check the cable connection.
• The built-in factory installed network interface is not disconnected from the network. Refer to your adapter documentation for information or call your network administrator for help.
• Your USB cable is not disconnected from the optional external network adapter. Check the cable connection.
• The optional external network adapter is not disconnected from the power source. Check the cable connection.
• The printer software is installed correctly:
1. From your desktop, double-click the 5200 Series folder.
2. Double-click 5200 Series Utility.

   Note:

   You can also access the Utility from Printer Services in Print dialog.

3. If the Utility does not launch, Install the All-In-One software. Remember to Remove the All-In-One software first before reinstalling it.
4. Print a test page.
• Your printer is not put on hold or paused.

Related topics

All-In-One is plugged in but does not print

Solve a networking problem

Back to Main Page