Understanding the supported commands
|
Command |
Description |
|---|---|
|
-action |
Specifies the action for the application. Possible values
|
|
-app |
Specifies the name of the installed application. |
|
-appfls |
Specifies that the supplied flash file is an application. |
|
-appVer |
Specifies the version information for the installed application. This command is optional. |
|
-ca y Where y is the location of the printer CA certificate file. |
Specifies the location of the printer CA certificate file. |
|
-caSign |
Updates the signed printer CA certificate file. |
|
-checkhostname |
Checks if the common name of the certificate matches the host name of the device. It aborts the deployment if it does not match. |
|
-csv y Where y is the location of the .csv file. |
Specifies the location of the .csv file that contains the printer IP addresses. |
|
-delay y Where y is the interval between tasks in milliseconds. |
Specifies the interval between tasks. |
|
-deleteDeviceCert |
Deletes default device certificates. |
|
-deploy |
Deploys a package or .ucf file. |
|
-discover |
Discovers printers. |
|
-dpl y Where y is the location of the package ZIP file. |
Specifies the location of the deployable package ZIP file. |
|
-exportCA |
Exports the printer CA certificates. |
|
-exportLogs |
Exports device logs including device history. |
|
-exportReports |
Exports all device reports. |
|
-exportSettings |
Exports device settings. |
|
-exportShortcuts |
Exports device shortcuts. |
|
-f |
Deploys the firmware flash file without checking the firmware version on the printer. |
|
-fls y Where y is the location of the .fls file. |
Specifies the location of the .fls file. |
|
-friendlyname y Where y is the friendly name of the PKCS certificate. |
Specifies friendly name of the PKCS certificate. |
|
-fwfls |
Specifies that the provided .fls file is a firmware. |
|
-fwr y Where y is the location of the firmware flash file. |
Specifies the location of the firmware flash file. |
|
-help |
Shows all the supported command options in DDU. |
|
-ip y Where y is the printer IP address. |
Specifies a list of comma‑separated IP addresses or host names, or IP address ranges. |
|
-lic y Where y is the location of the license file. |
Specifies the location of the license file. |
|
-lictech y Where y is the license technology type. |
Specifies the license technology. Possible values
|
|
-nocsv |
Specifies that the discovery output must not be written in the .csv file. |
|
-npa y Where y is the location of the .npa file. |
Specifies the absolute path of the .npa file. |
|
-npaport y Where y is the port used to send the command. |
Specifies the NPA port that is used for sending the NPA command to the printer. |
|
-out y Where y is the location of the folder where the discovery certificate files are stored. |
Specifies the location of the folder where the discovery certificate files are stored. |
|
-pin y Where y is the PIN for accessing secured printers. |
Specifies the PIN for accessing secured printers. |
|
-pkcs y Where y is the location of the PKCS certificate file. |
Specifies the location of the PKCS certificate file. |
|
-pkcspassword y Where y is the password of the PKCS certificate file. |
Specifies the password of the PKCS certificate file. |
|
-pkg y Where y is the location of the package ZIP file obtained from Package Builder. |
Specifies the location of the package ZIP file obtained from Package Builder. |
|
-pwd y Where y is the password for accessing secured printers. |
Specifies the password for accessing secured printers. |
|
-q |
Executes commands without a status window. |
|
-reboot |
Reboots printers. |
|
-rhj |
Delete held print jobs. |
|
-rlm |
The LDAP Kerberos realm. |
|
-rlmSetup y Where y is the setup name configured on the printer when using realm‑based authentication method. |
Specifies the setup name configured on the printer when using realm‑based authentication method. |
|
-rlmType y Where y is the login realm type configured on the printer. |
Specifies the login realm type configured on the printer. Possible values
|
|
-signCert y Where y is the location of the signed device certificate file. |
Specifies the location of the signed device certificate file. |
|
-snf |
Specifies if the file is a Scan‑to‑Network configuration file. |
|
-stop |
Stops the workflow. |
|
-ucf y Where y is the location of the .ucf file. |
Specifies the location of the .ucf file. |
|
-usr y Where y is the user name for accessing secured printers. |
Specifies the user name for accessing secured printers. |
|
-varCsv y Where y is the location of the Virtual Solution Center (VSC) file that contains variable setting information. |
Specifies the location of the VSC file that contains variable setting information. |
|
-vcc y Where y is the location of the VSC Configuration file. |
Specifies the location of the VSC Configuration file. |
|
-workflow y Where y is the location of the workflow file. |
Executes a workflow configuration. |