Configuring Lexmark Print Management Client

Serverless Print Release

  1. From your computer, navigate to the C:\ProgramData\LPMC folder.
  2. Using a text editor, open the configuration.xml file.
  3. If necessary, set LoggingEnabled to true.
  4. From the ServerSettings section, do the following:

    • Set ServerIP to the IP address of the LPM server.

    • Set ServerPort to 443 for SSL connections or 9780 for non‑SSL connections.

    • Set ServerSSL to true for SSL connections or false for non‑SSL connections.

  5. From the IDPServerSettings section, do the following:

    • Set ServerIP to the IP address of the Identity Provider (IDP) server, and then add /idm.

    • Set ServerPort to 443 for SSL connections or 9780 for non‑SSL connections.

    • Set ServerSSL to true for SSL connections or false for non‑SSL connections.

Server Print Release

  1. From your computer, navigate to the C:\ProgramData\LPMC folder.
  2. Using a text editor, open the configuration.xml file.
  3. If necessary, set LoggingEnabled to true.
  4. From the ServerSettings section, do the following:

    • Set ServerIP to the IP address of the Print Release server. The default value is lsp.lexmark.com/Lexmark.

    • Set ServerPort to 443 for SSL connections or 80 for non‑SSL connections.

    • Set ServerSSL to true for SSL connections or false for non‑SSL connections.

  5. From the IDPServerSettings section, do the following:

    • Set ServerIP to the IP address of the Print Release server. The default value is idp.iss.lexmark.com.

    • Set ServerPort to 443 for SSL connections or 80 for non‑SSL connections.

    • Set ServerSSL to true for SSL connections or false for non‑SSL connections.

  6. From the IDPServerSettings section, set ServerPort to 443.