Releasing print jobs using rf IDEAS

  1. From the printer, tap your badge on the card reader.

    To acknowledge the badge, the Ethernet 241 adapter beeps once. The following subsequent beeps indicate the status of the card authentication:

    • Three short beeps—The communication between the Ethernet 241 adapter and Lexmark Print Management Print Release is successful. A request is made to release your queued print jobs.

      Note: If the user account is not configured correctly, or if the queued jobs exceed the user’s quotas, then the jobs are not printed. Make sure that the badge ID value in the Badge tab is configured correctly.

    • Two long beeps—The IP address of the printer is not determined. Make sure that the connection of the Ethernet 241 adapter to the printer is working properly.

    • Five short beeps and two long beeps—The communication between the Ethernet 241 adapter and Lexmark Print Management server is unsuccessful. Make sure that the Ethernet 241 adapter is configured properly and it is connected to the network.

    • No beep—The Lexmark Print Management server has received the request to release the queued print jobs but is unable to respond. Make sure that the system is configured correctly.

  2. From the home screen, touch Print Release.
  3. Select one or more print jobs.
    Note: To print the jobs that are delegated to you, touch if necessary, select a user name, and then select the print jobs.
  4. Touch Print.